Checking Finger Cuff Lifetime for NIBP100D/NIBP100D-HD
One may check the remaining life for a finger cuff sensor used with the noninvasive blood pressure monitors, NIBP100D and NIBP100D-HD. These finger cuffs expire after a certain number of hours of measurement. Specifically, the lifetime of the standard finger cuff is 150 hours, unless longer-life cuffs were ordered.
There is a way to check the lifetime of any finger cuff. On the NIBP100D and NIBP100D-HD device itself, one checks through the user interface/the front panel. Please note, this feature is available only from CNAP software version 3.7 and higher.
To check remaining finger cuff sensor hours:
- Connect the finger cuff to the NIBP100D/NIBDP100D-HD in standard fashion.
- Turn on the device.
- Then, before starting an experiment, use the selection knob on the front panel of the instrument, to reach the CNAP menu / service / log.
- When prompted, enter the four-digit user password: 8737
- Upon doing so, the remaining time of the connected finger cuff sensor will be displayed.
Associated Applications
Associated Application Notes
Associated Advanced Features
WHAT'S NEW
Speech and communication are integral parts of human relationships and development As such,...
Stay Connected