Signal inversion
If the positive and negative lead wires were merely swapped, then the signal will just be inverted (not otherwise distorted). The signal may be flipped over either with “Transform > Rescale…”:
or “Transform > Waveform Math…”:
In the case of “Rescale”, just select the inverted channel before choosing “Rescale”. In the case of “Waveform Math”, the source channel is specified through the dialog box, so it is not necessary to select the channel first.
Page last modified 19Jan2015
WHAT'S NEW
With the anticipation of the 2024 Olympics, there has been lots of recent research on athletic...
Stay Connected